Profibus PPO7 IO module object for frequency converter ABB ACS880.
 This IO module are the receive and transmit areas for the profibus
 protocol PPO7. See class ABB_ACS880_PPO7 for more information.

 Connect the object to an object of class or subclass of
 ABB_ACS880_1 with the IoConnect method.

 The class ABB_ACS880_PPO7_IoModule will automatically be
 included when you configure an ABB_ACS880_Pb_Slave object in
 the profibus configurator. See ABB_ACS880_Pb_Slave for more
 information.

 The figure below displays the result of the Profibus configuration in
 in the node hierarchy.

 All the object for the Profibus slave, PPO7 and IO required to
 communicate are displayed in the figure below.

 As the connection between individual signals and channels are predefined,
 it is only required to make one Io connection between the ABB_ACS880_1 and
 the IoModule object.

 By opening a signal object it is possible to see the predefined connection.
 The signal UserStatusSW1 is connected to the channel I_PZD6.

• ABB_ACS880_Pb_Slave
• ABB_ACS880_PPO7
• ABB_ACS880_1
• Pb_DP_Slave
• Datasheet

  Received ID message word from the converter

  Received IND message word from the converter

  Received Value message word from the converter

  Received main status word from the converter
  Parameter group 6 index 11.

  Received actual speed word from the converter
  Parameter group 1 index 1.

  Received actual current word from the converter
  Parameter group 1 index 7.
  The parameter is defined in group 52 index 3

  Received actual torque word from the converter
  Parameter group 1 index 10.
  The parameter is defined in group 52 index 5

  Received user status 1 word from the converter
  Parameter group 6 index 50.
  The parameter is defined in group 52 index 6

  Received warning message 1 word from the converter
  Parameter group 4 index 6.
  The parameter is defined in group 52 index 7

  Received fault/tripped message 1 word from the converter
  Parameter group 4 index 1.
  The parameter is defined in group 52 index 8.

  Not connected channel that can be user defined.
  The parameter is defined in group 52 index 9.

  Not connected channel that can be user defined.
  The parameter is defined in group 52 index 10.

  Not connected channel that can be user defined.
  The parameter is defined in group 52 index 11.

  Not connected channel that can be user defined.
  The parameter is defined in group 52 index 12.

  Transmitted ID word to the converter

  Transmitted IND word to the converter

  Transmitted Value word to the converter

  Transmitted control word to the converter
  Parameter group 6 index 1.
  Parameter define in group 53 index 1.

  Transmitted reference speed word to the converter
  Parameter group 3 index 5.
  Parameter define in group 53 index 2.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 3.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 4.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 5.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 6.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 7.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 8.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 9.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 10.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 11.

  Transmitted undefine word to the converter
  Parameter define in group 53 index 12.