Volume ABB
Attributes: Runtime \| Development \| System \| Template \| Detail C Binding: Struct \| Class \| Code ClassTree	INDEX NO INDEX

Class ABB_ACS880_1Fo
Author	je
Version	1.0
Modified	24-JUN-2013 11:11:13.86
Code	PlcTemplate

 Plc function object to profibus ABB_ACS880_1, powerlink ABB_ACS880_Epl_1 and
 profinet ABB_ACS880_Pn_1.


 Connect the function object to an object of class or subclass of
 profibus class ABB_ACS880_1, powerlink class ABB_ACS880_Epl_1 or
 profinet class ABB_ACS880_Pn_1.

See also

RtBody attributes pwr_sClass_ABB_ACS880_1Fo
Boolean	PowerOn	pwo	Should be true when the converter is energized.
Boolean	Start	sta	Start command. Bit 0 in control word is set to true. See class help for object ABB_ACS880_1 attribute MainControlCW This bit is used togheter with bit 3 "Enable" in the controlword to control start/stop commands.
Float32	RefSpeed	REF	Speed reference to the converter.
Boolean	NoOff2	nof2	OFF2 control. Bit 1 in controlword is set to true. See class help for object ABB_ACS880_1 attribute MainControlCW Default value is 1.
Boolean	NoOff3	nof3	OFF3 control. Bit 2 in controlword is set to true. See class help for object ABB_ACS880_1 attribute MainControlCW Default value is 1.
Boolean	EnableOperation	eno	Enable control. Bit 3 in controlword is set to true. See class help for object ABB_ACS880_1 attribute MainControlCW This bit is used togheter with bit 0 in the controlword to control start/stop commands.
Boolean	RampOutZero	roz	Ramp Out Zero. Bit 4 in controlword is set to true. See class help for object ABB_ACS880_1 attribute MainControlCW Default value is 1.
Boolean	RampHold	rh	Ramp Out hold. Bit 5 in controlword is set to true. See class help for object ABB_ACS880_1 attribute MainControlCW Default value is 1.
Boolean	RampInZero	riz	Ramp In Zero. Bit 6 in controlword is set to true. See class help for object ABB_ACS880_1 attribute MainControlCW Default value is 1.
AttrRef	PlcConnect		Connected ABB_ACS880_1 object in plant hierarchy.
Boolean	ReadyRemote	rdy	Ready remote is true when alla condition is Ok i.e. start command is possible from this object.
Boolean	Run	run	Converter is started.
Boolean	Di1	di1	Status from converter IO digital input Di1.
Boolean	Di2	di2	Status from converter IO digital input Di2.
Boolean	Di3	di3	Status from converter IO digital input Di3.
Boolean	Di4	di4	Status from converter IO digital input Di4.
Boolean	Di5	di5	Status from converter IO digital input Di5.
Boolean	Di6	di6	Status from converter IO digital input Di6.
Boolean	DiIL	diil	Status from converter IO digital input DIIL.
Boolean	Sto	sto	True when converter STO function is activated. Two digital input In1 and In2 affect this safe torque off function.

DevBody attributes
pwrs:Class-$PlcNode	PlcNode

GraphPlcNode
object_type	11
parameters[0]	9
parameters[1]	1
parameters[2]	10
parameters[3]	0
subwindows	1
subwindow_class[0]	pwrb:Class-WindowPlc
graphmethod	0 (standard, individual attributes)
graphindex	0
default_mask[0]	39
default_mask[1]	3
segname_annotation	1
compmethod	58
compindex	0
tracemethod	0
traceindex	0
connectmethod	10
executeordermethod	2
objname	ABB_ACS880_1Fo
graphname	ABB_ACS880_1Fo

Template Object
NoOff2	1
NoOff3	1
RampOutZero	1
RampHold	1
RampInZero	1

Attributes detail

PowerOn Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	pwo
Body	RtBody

 Should be true when the converter is energized.

Start Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	sta
Body	RtBody

 Start command. Bit 0 in control word is set to true.
 See class help for object ABB_ACS880_1 attribute MainControlCW

 This bit is used togheter with bit 3 "Enable" in the controlword
 to control start/stop commands.

RefSpeed Input
Class	Input
Type	Float32
Flags	Noinvert
GraphName	REF
Body	RtBody

   Speed reference to the converter.

NoOff2 Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	nof2
Body	RtBody

 OFF2 control. Bit 1 in controlword is set to true.
 See class help for object ABB_ACS880_1 attribute MainControlCW

 Default value is 1.

NoOff3 Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	nof3
Body	RtBody

 OFF3 control. Bit 2 in controlword is set to true.
 See class help for object ABB_ACS880_1 attribute MainControlCW

 Default value is 1.

EnableOperation Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	eno
Body	RtBody

 Enable control. Bit 3 in controlword is set to true.
 See class help for object ABB_ACS880_1 attribute MainControlCW

 This bit is used togheter with bit 0 in the controlword to control
 start/stop commands.

RampOutZero Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	roz
Body	RtBody

 Ramp Out Zero. Bit 4 in controlword is set to true.
 See class help for object ABB_ACS880_1 attribute MainControlCW

 Default value is 1.

RampHold Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	rh
Body	RtBody

 Ramp Out hold. Bit 5 in controlword is set to true.
 See class help for object ABB_ACS880_1 attribute MainControlCW

 Default value is 1.

RampInZero Input
Class	Input
Type	Boolean
Flags	Noinvert
GraphName	riz
Body	RtBody

 Ramp In Zero. Bit 6 in controlword is set to true.
 See class help for object ABB_ACS880_1 attribute MainControlCW

 Default value is 1.

PlcConnect Intern
Class	Intern
Type	AttrRef
Flags
Body	RtBody

   Connected ABB_ACS880_1 object in plant hierarchy.

ReadyRemote Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	rdy
Body	RtBody

 Ready remote is true when alla condition is Ok i.e.
 start command is possible from this object.

Run Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	run
Body	RtBody

 Converter is started.

Di1 Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	di1
Body	RtBody

 Status from converter IO digital input Di1.

Di2 Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	di2
Body	RtBody

 Status from converter IO digital input Di2.

Di3 Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	di3
Body	RtBody

 Status from converter IO digital input Di3.

Di4 Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	di4
Body	RtBody

 Status from converter IO digital input Di4.

Di5 Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	di5
Body	RtBody

 Status from converter IO digital input Di5.

Di6 Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	di6
Body	RtBody

 Status from converter IO digital input Di6.

DiIL Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	diil
Body	RtBody

 Status from converter IO digital input DIIL.

Sto Output
Class	Output
Type	Boolean
Flags	ReduTransfer\|Noedit\|Noinvert
GraphName	sto
Body	RtBody

 True when converter STO function is activated.
 Two digital input In1 and In2 affect this
 safe torque off function.

PlcNode Buffer
Class	Buffer
Type	pwrs:Class-$PlcNode
Flags
Body	DevBody